SET UP

Read the Operation Manual before setting up the Exerbotics Machine. Place the Product where it will be used before beginning the setup procedure. 

ELECTRICAL POWER REQUIREMENTS

The Product requires a dedicated* line.

* One individual branch circuit for each Product per NEC article 210-21 (b) (1) and 210-23 (or other appropriate, country specific electrical compliance guidelines). The hot, neutral and ground wires must each be routed independently (not looped or tied to other circuits.) 

NOTE: Do not modify the plug provided with this product. If the plug does not fit into an available electrical outlet, have a proper outlet installed by a qualified electrician. 

GROUNDING INSTRUCTIONS

This Exerbotics product must be properly grounded. If the unit malfunctions or breaks down, proper grounding provides a path of least resistance for the electric current, which reduces the risk of shock to anyone touching or using the equipment. Each unit is equipped with an electrical cord, which includes an equipment grounding conductor and a grounding plug. The plug must be inserted into an outlet that has been properly installed and grounded in accordance with all local codes and ordinances.

A temporary adapter MUST NOT BE USED to connect this plug to a two-pole receptacle in North America. If a properly grounded, 15-amp outlet is not available, one must be installed by a qualified electrician.

DANGER: A risk of electrical shock may result from improper connection of the equipment-grounding conductor. Check with a qualified electrician if in doubt as to proper grounding technique. DO NOT modify the plug provided with the product. If it will not fit an electrical outlet, have a proper outlet installed by a qualified electrician. Any modification to the electrical plug will result in a voided warranty.

NETWORKING

One type RJ45 networking port (A) is located inside the data cabinet. This network port allows the Exerbotics machines to network to the local area network and each other. 

 Any use of the port for other than its intended purpose could void the product warranty.